Product Complaints Archives - Vernier Calipers https://vernierscaliper.com/category/product-complaints Vernier Calipers’ Guide for Uses, Types, Measurements & All Info Tue, 16 Feb 2016 12:25:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.2.5 Cheapest Plastic Vernier Caliper – 6in Almost Useless https://vernierscaliper.com/cheapest-plastic-vernier-caliper-6in-almost-useless-483.html https://vernierscaliper.com/cheapest-plastic-vernier-caliper-6in-almost-useless-483.html#respond Fri, 26 Feb 2016 11:20:36 +0000 http://vernierscaliper.com/?p=483 A pocket friendly vernier caliper can be an extremely useful tool for people who need to make precise measurements on the fly and save the hassle of carrying around a lengthy tool in a wooden box. Plastic vernier calipers are a popular choice in this regard since they reduce the probability of scratching the surface

The post Cheapest Plastic Vernier Caliper – 6in Almost Useless appeared first on Vernier Calipers.

]]> https://vernierscaliper.com/cheapest-plastic-vernier-caliper-6in-almost-useless-483.html/feed 0 General Tools 6-Inches Digital Fractional Caliper Just Good for Show https://vernierscaliper.com/general-tools-6-inches-digital-fractional-caliper-just-good-for-show-487.html https://vernierscaliper.com/general-tools-6-inches-digital-fractional-caliper-just-good-for-show-487.html#respond Mon, 18 Jan 2016 09:46:31 +0000 http://vernierscaliper.com/?p=487 General Tool’s 6 inch Digital Caliper is a sleek looking tool which features a fractional display LCD, but as many of its users found out; looks can be deceiving. A variety of problems ranging from low battery life to errors in readings and frustration while removing the back cover have served to make this tool

The post General Tools 6-Inches Digital Fractional Caliper Just Good for Show appeared first on Vernier Calipers.

]]> https://vernierscaliper.com/general-tools-6-inches-digital-fractional-caliper-just-good-for-show-487.html/feed 0 Calipro Digital Caliper – 6″ Bad Experience on Various Defects https://vernierscaliper.com/calipro-digital-caliper-6-bad-experience-on-various-defects-451.html https://vernierscaliper.com/calipro-digital-caliper-6-bad-experience-on-various-defects-451.html#respond Mon, 14 Dec 2015 08:34:08 +0000 http://vernierscaliper.com/?p=451 High Vernier Calipers are normally not used in high scale as compare to cheaper calipers. But what people expect from cheaper calipers is the fact they these should yield proper results and measurements which is their basic function. I also have used high quality caliper made by Japan, Switzerland or Germany that I have been using

The post Calipro Digital Caliper – 6″ Bad Experience on Various Defects appeared first on Vernier Calipers.

]]> https://vernierscaliper.com/calipro-digital-caliper-6-bad-experience-on-various-defects-451.html/feed 0 ML Tools Digital Caliper 68202 Poor Assembly & LCD with Zero Error https://vernierscaliper.com/ml-tools-digital-caliper-68202-poor-assembly-lcd-with-zero-error-265.html https://vernierscaliper.com/ml-tools-digital-caliper-68202-poor-assembly-lcd-with-zero-error-265.html#comments Thu, 17 Sep 2015 09:26:06 +0000 http://vernierscaliper.com/?p=265 The Assembly:The poor assembly was apparent from the start when the caliper started producing scratching sounds when its jaws were opened. The feeling was reinforced when observed that the two measuring jaws were not parallel with each other which explained the noise. SE 781BC Vernier Caliper also have these type of problems. However the caliper

The post ML Tools Digital Caliper 68202 Poor Assembly & LCD with Zero Error appeared first on Vernier Calipers.

]]> https://vernierscaliper.com/ml-tools-digital-caliper-68202-poor-assembly-lcd-with-zero-error-265.html/feed 1 The Weirdest SE 781BC Vernier Caliper Ever Experienced https://vernierscaliper.com/the-weirdest-se-781bc-vernier-caliper-ever-experienced-241.html https://vernierscaliper.com/the-weirdest-se-781bc-vernier-caliper-ever-experienced-241.html#respond Fri, 11 Sep 2015 10:55:56 +0000 http://vernierscaliper.com/?p=241 Although my expectations were not too high from these calipers, I was still surprised by what looked like the strangest calipers I have ever seen. The machining was extremely poor for a production item and I wouldn’t have taken them seriously if I had known beforehand how bad the machining would be. Even machine like SE

The post The Weirdest SE 781BC Vernier Caliper Ever Experienced appeared first on Vernier Calipers.

]]> https://vernierscaliper.com/the-weirdest-se-781bc-vernier-caliper-ever-experienced-241.html/feed 0